Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VICTREX® HT™ P22 - PEK - Victrex plc

Material Data Center offers the following functions for VICTREX® HT™ P22:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Victrex HT datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Recommandations pour la transformation Extrusion
Any use of this information falls under the rules of our disclaimer.
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Module en traction 4300 MPa ISO 527
Contrainte d'écoulement 100 MPa ISO 527
Déformation à la rupture 10 % ISO 527
Module de flexion, 23°C 4000 MPa ISO 178
Résistance à la flexion 170 MPa ISO 178
Résistance au choc Izod, +23°C N kJ/m² ISO 180/1U
Résistance au choc Izod avec entaille, +23°C 4.5 kJ/m² ISO 180/1A
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 373 °C ISO 11357-1/-3
Température de transition vitreuse, 10°C/min 152 °C ISO 11357-1/-2
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1300 kg/m³ ISO 1183
Recommandations pour la transformation ExtrusionValeurUnitéNorme du test
Pré-séchage - température 120 - 150 °C -
Pré-séchage - temps 3 - 5 h -
L'humidité de traitement ≤0.02 % -
Température de la matière fondue 400 - 420 °C -
Caractéristiques
Transformation
Extrusion (autres)
Conditionnement
Poudre, Couleurs naturelles
Certifications
Contact alimentaire, FDA 21 CFR approbation
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.